Automation

NLX WITH GX

BMT TURRET WITH 10,000 rpm
Improved machining capacity and milling accuracy

BOX WAYS IN ALL AXES
Optimum damping characteristics and dynamic rigidity

100 mm Y-AXIS
Eccentric machining

INTEGRATED AUTOMATION

Workpieces up to ø 200 mm and 150 mm in length, 2 × 10 kg maximum handling weight

GX 10 T GANTRY LOADER FOR THE NLX 2500

Workpieces up to ø 200 mm and 150 mm in length,
2 × 10 kg maximum handling weight
Stacking magazine with 2 loading stations and
10 or 20 pallet positions; 75 kg load capacity per pallet position
High-speed loader: 75 / 90 m/min rapid traverse in X / Z
Small interference contour due to loading arm with integrated double gripper
Linking of several machines possible via the
gantry loader

Handling of workpieces up to ø 170 mm
Three versions: Load capacity 10 / 20 / 35 kg*
Conversational control, no Programming knowledge required
Modular gripper system, Internal and external gripper as standard (freely selectable)
For all CLX machines with SIEMENS and FANUC control

^{* only available for the CLX 450 / 550}

Operation directly via the machine control, no additional external control for automation
Max. load capacity 150 kg (250 kg as an option)
Clamping for 2 pallet sizes:
10 pallets 320 × 320 mm pallets, or 6 pallets* 400 × 400 mm
< 40 sec. pallet change time
SCHUNK clamping system VERO-S with 32 kN clamping force;
up to 112 kN with turbo function
Available for the DMU 50, CMX V and a number of other milling machines from DMG MORI

^{* optional}

Modular automation system for workpieces up to 15 kgs
Workpiece magazine:
2 × up to 6 × trays for 110 or 220 mm workpiece heights;
trays: 600 × 800 mm, max. 250 kg load capacity
Incl. Kuka robot and SCHUNK single or double gripper, incl. customer-specific gripper jaws
Expansion levels (optional): SPC station, NOK chute, blow-off station and turn-over device

THE NEW STANDARD FOR HORIZONTAL MACHINING CENTERS

speedMASTER 20,000 rpm with 221 Nm
- 740 cm³ / min in CK45
- M42 drilling in CK45 (15,000 rpm with 250 Nm optional)
toolSTAR magazine with 60 tool locations
- 2.2 sec. chip-to-chip time (NHX 4000)
- Integrated tool breakage monitoring
Chip conveyor with integrated tank and cyclone filter, and 15 bar internal coolant supply
100 rpm NC swiveling / rotary table (DDM)
Advanced hydraulic clamping interface, as “Auto-Coupler” (from below) and fixed from above, for more automation flexibility
Optimized cast components for improved dynamics and stability, and smartSCALE linear encoders from MAGNESCALE
CELOS with MAPPS on FANUC and CELOS with SIEMENS